Section 4: Motor Installation¶
Parts and Tools Required¶
| QTY | Part/Description | Packaged In |
|---|---|---|
| 4 | Servo Motor | Electronics |
| 1 | CRP900-00-HW-SRV | CRP900-00-XXXX-HW |
| (4) Oldham Assembly - Motor Side | ||
| (16) M5 x 14mm Socket Head Cap Screw | ||
| (16) No. 10 Flat Washer |
- Required Tools:
- 4mm Allen Wrench
- 3mm Allen Wrench
- Tape Measure
4.1 Servo Motor Installation¶
Assembly Note
Your kit includes four servo motors that are specifically tuned for each axis and are labeled accordingly. Ensure the motors are installed on the proper axis for proper performance of your CNC machine.
4.1.1¶
- Slide the motor side of the oldham coupler onto the motor as indicated.
4.1.2¶
- Position the end of the coupler 29mm (1-1/8") from the motor flat.
- Tighten the clamping screw on the oldham coupler.
4.1.3¶
- Attach the motor to one of the table axes as indicated.
4.1.4¶
- Tighten the indicated fasteners.
4.1.5¶
- Install motors on the remaining axes.