Section 1: Table Assembly¶
Parts and Tools Required¶
2' x 2' Parts List
| QTY | Part/Description | Packaged In |
|---|---|---|
| 3 | 8080 Crossmember Extrusion, 641mm (25-1/4") | Linear Extrusion Bundle |
| 1 | CRP840-00-650 - PRO Linear Ballscrew Table Axis | Table Axis Left |
| 1 | CRP840-00-650 - PRO Linear Ballscrew Table Axis | Table Axis Right |
| 1 | CRP910-00-24-FAST | CRP900-00-2424-HW |
| (24) 40 Series Anchor Fastener | ||
| (24) M8 x 30mm Socket Head Cap Screw | ||
| (12) M8 Slide-in T-Nut | ||
| 4 | CRP913-00 | CRP900-00-2424-HW |
| (1) M12 Leveling Foot 50mm (Total QTY: 4) | ||
| (1) M12 BTP Leveling Foot End Plate (Total QTY: 4) | ||
| (2) M8 x 20mm Socket Head Cap Screw (Total QTY: 8) | ||
| (2) M8 Roll In T-Nut (Total QTY: 8) |
2' x 3' Parts List
| QTY | Part/Description | Packaged In |
|---|---|---|
| 4 | 8080 Crossmember Extrusion, 641mm (25-1/4") | Linear Extrusion Bundle |
| 1 | CRP840-00-950 - PRO Linear Ballscrew Table Axis | Table Axis Left |
| 1 | CRP840-00-950 - PRO Linear Ballscrew Table Axis | Table Axis Right |
| 1 | CRP910-00-36-FAST | CRP900-00-2436-HW |
| (32) 40 Series Anchor Fastener | ||
| (32) M8 x 30mm Socket Head Cap Screw | ||
| (16) M8 Slide-in T-Nut | ||
| 4 | CRP913-00 | CRP900-00-2436-HW |
| (1) M12 Leveling Foot 50mm (Total QTY: 4) | ||
| (1) M12 BTP Leveling Foot End Plate (Total QTY: 4) | ||
| (2) M8 x 20mm Socket Head Cap Screw (Total QTY: 8) | ||
| (2) M8 Roll In T-Nut (Total QTY: 8) |
3' x 2' Parts List
| QTY | Part/Description | Packaged In |
|---|---|---|
| 3 | 8080 Crossmember Extrusion, 961mm (37-7/8") | Linear Extrusion Bundle |
| 1 | CRP840-00-650 - PRO Linear Ballscrew Table Axis | Table Axis Left |
| 1 | CRP840-00-650 - PRO Linear Ballscrew Table Axis | Table Axis Right |
| 1 | CRP910-00-24-FAST | CRP900-00-3624-HW |
| (24) 40 Series Anchor Fastener | ||
| (24) M8 x 30mm Socket Head Cap Screw | ||
| (12) M8 Slide-in T-Nut | ||
| 4 | CRP913-00 | CRP900-00-3624-HW |
| (1) M12 Leveling Foot 50mm (Total QTY: 4) | ||
| (1) M12 BTP Leveling Foot End Plate (Total QTY: 4) | ||
| (2) M8 x 20mm Socket Head Cap Screw (Total QTY: 8) | ||
| (2) M8 Roll In T-Nut (Total QTY: 8) |
3' x 3' Parts List
| QTY | Part/Description | Packaged In |
|---|---|---|
| 4 | 8080 Crossmember Extrusion, 961mm (37-7/8") | Linear Extrusion Bundle |
| 1 | CRP840-00-950 - PRO Linear Ballscrew Table Axis | Table Axis Left |
| 1 | CRP840-00-950 - PRO Linear Ballscrew Table Axis | Table Axis Right |
| 1 | CRP910-00-36-FAST | CRP900-00-3636-HW |
| (32) 40 Series Anchor Fastener | ||
| (32) M8 x 30mm Socket Head Cap Screw | ||
| (16) M8 Slide-in T-Nut | ||
| 4 | CRP913-00 | CRP900-00-3636-HW |
| (1) M12 Leveling Foot 50mm (Total QTY: 4) | ||
| (1) M12 BTP Leveling Foot End Plate (Total QTY: 4) | ||
| (2) M8 x 20mm Socket Head Cap Screw (Total QTY: 8) | ||
| (2) M8 Roll In T-Nut (Total QTY: 8) |
- Required Tools:
- 6mm Ball-End Allen Wrench
- Adjustable Wrench
1.1 Table Base Assembly¶
1.1.1¶
- Insert socket head cap screws into anchor fasteners as indicated.
1.1.2¶
- Slide the anchor fasteners and screws into the extrusion counterbores.
1.1.3¶
- Thread the screws into the left table ballscrew axis as indicated.
Assembly Note
If crossmember extrusion has engraved arrows, orient arrows on all crossmembers pointing up.
1.1.4¶
Assembly Note
The table crossmembers may be installed at multiple heights to accommodate various fixtures, such as a vise or spoilboard. For general use, we recommend the middle location, shown in the upper right window. Images in the assembly instructions show the crossmembers in their highest location.
- Alternately, you can use the provided slide-in t-nuts to lower the crossmember extrusion.
1.1.5¶
- Tighten the indicated fasteners
Assembly Note
Be sure to tighten all four crossmember fasteners.
1.1.6¶
- Repeat the previous steps to install the remaining crossmembers.
Machine Configuration Options
2' x 2' (2424) and 3' x 2' (3624) machines only require three crossmembers.
1.1.7¶
- Add anchor fasteners and screws to the other side of the extrusion and attach the right table ballscrew axis.
1.1.8¶
- Tighten all remaining crossmember anchor screws.
1.2 Leveling Feet Assembly¶
1.2.1¶
- Attach a foot plate to a ballscrew axis as indicated.
Assembly Note
If you assembled the crossmembers in the lowered configuration, locate the block to the side of the crossmember rather than under it.
1.2.2¶
- Bias the foot plate towards the crossmember, ensuring it is flush with the bottom of the extrusion.
- Tighten the indicated fasteners.
Assembly Note
If your crossmembers are not in the default configuration, do not attempt to bring the foot plate flush with the extrusion.
1.2.3¶
- Install the lock nut onto the leveling foot and thread the leveling foot into the foot plate.
1.2.4¶
- Tighten the lock nut.
1.2.5¶
- Repeat this process to install the remaining leveling feet at the indicated locations.