Tools List¶
| Requirement | Tool |
|---|---|
| Required | Metric Ball-End Allen Wrenches 2.5mm, 3mm, 4mm, 5mm, 6mm |
| Required | Imperial Allen Wrenches 3/32", 1/4" |
| Required | Adjustable Wrench |
| Required | Standard (Flat Tip) Screwdriver |
| Required | Small Phillips Screwdriver (PH1) |
| Required | (2) Clamps 6" C-Clamps recommended |
| Required | Tape Measure |
| Required | Utility Knife |
| Recommended | 6mm Hex Ball-end Power Bit and Drill/Impact Driver |
| Recommended | Metric Combination Wrenches 8mm, 10mm, 13mm, 16mm, 17mm |
| Recommended | Metric Tape Measure |
| Recommended | Threadlocker (Loctite Blue 242) |
| Recommended | Dimensional Lumber 2x4 recommended of min length 30"40" |
| Recommended | (2) 24" Hand Trigger Clamps |
| Recommended | Cable Ties |
| Recommended | Level (minimum 48") |